资讯专栏INFORMATION COLUMN

supervisord 的 XML-RPC API 使用说明

baoxl / 3697人阅读

摘要:的安装使用安装的配置生成配置文件的配置文件如下启动启动的命令如下使用查看相关信息查看的所有命令可以使用帮助命令查看某个命令的具体用法为的使用通过配置文件所知,我们的配置的如下连接的代码示例如下当我们不知道有哪些方法的时候,可以使用如

supervisord 的安装

使用 easy_install 安装 supervisord

sudo easy_install  supervisord 
supervisord 的配置

生成配置文件

sudo sh -c "/usr/local/bin/echo_supervisord_conf  > /etc/supervisord.conf"

supervisord 的配置文件如下

; Sample supervisor config file.
;
; For more information on the config file, please see:
; http://supervisord.org/configuration.html
;
; Note: shell expansion ("~" or "$HOME") is not supported.  Environment
; variables can be expanded using this syntax: "%(ENV_HOME)s".

[unix_http_server]
file=/tmp/supervisor.sock   ; (the path to the socket file)
;chmod=0700                 ; socket file mode (default 0700)
;chown=nobody:nogroup       ; socket file uid:gid owner
;username=user              ; (default is no username (open server))
;password=123               ; (default is no password (open server))

[inet_http_server]         ; inet (TCP) server disabled by default
port=127.0.0.1:9001        ; (ip_address:port specifier, *:port for all iface)
username=ops              ; (default is no username (open server))
password=vipshop               ; (default is no password (open server))

[supervisord]
logfile=/tmp/supervisord.log ; (main log file;default $CWD/supervisord.log)
logfile_maxbytes=50MB        ; (max main logfile bytes b4 rotation;default 50MB)
logfile_backups=10           ; (num of main logfile rotation backups;default 10)
loglevel=info                ; (log level;default info; others: debug,warn,trace)
pidfile=/tmp/supervisord.pid ; (supervisord pidfile;default supervisord.pid)
nodaemon=false               ; (start in foreground if true;default false)
minfds=1024                  ; (min. avail startup file descriptors;default 1024)
minprocs=200                 ; (min. avail process descriptors;default 200)
;umask=022                   ; (process file creation umask;default 022)
;user=chrism                 ; (default is current user, required if root)
;identifier=supervisor       ; (supervisord identifier, default is "supervisor")
;directory=/tmp              ; (default is not to cd during start)
;nocleanup=true              ; (don"t clean up tempfiles at start;default false)
;childlogdir=/tmp            ; ("AUTO" child log dir, default $TEMP)
;environment=KEY="value"     ; (key value pairs to add to environment)
;strip_ansi=false            ; (strip ansi escape codes in logs; def. false)

; the below section must remain in the config file for RPC
; (supervisorctl/web interface) to work, additional interfaces may be
; added by defining them in separate rpcinterface: sections
[rpcinterface:supervisor]
supervisor.rpcinterface_factory = supervisor.rpcinterface:make_main_rpcinterface

[supervisorctl]
serverurl=unix:///tmp/supervisor.sock ; use a unix:// URL  for a unix socket
;serverurl=http://127.0.0.1:9001 ; use an http:// url to specify an inet socket
;username=chris              ; should be same as http_username if set
;password=123                ; should be same as http_password if set
;prompt=mysupervisor         ; cmd line prompt (default "supervisor")
;history_file=~/.sc_history  ; use readline history if available

; The below sample program section shows all possible program subsection values,
; create one or more "real" program: sections to be able to control them under
; supervisor.

[program:ds.tools.vip.com]
command=sh /apps/dat/web/newcode/debug_ds/run.sh ; the program (relative uses PATH, can take args)
process_name=%(program_name)s ; process_name expr (default %(program_name)s)
numprocs=1                    ; number of processes copies to start (def 1)
directory=/apps/dat/web/newcode/debug_ds/ ; directory to cwd to before exec (def no cwd)
;umask=022                     ; umask for process (default None)
;priority=999                  ; the relative start priority (default 999)
autostart=true                ; start at supervisord start (default: true)
autorestart=true        ; whether/when to restart (default: unexpected)
;startsecs=1                   ; number of secs prog must stay running (def. 1)
;startretries=3                ; max # of serial start failures (default 3)
;exitcodes=0,2                 ; "expected" exit codes for process (default 0,2)
stopsignal=QUIT               ; signal used to kill process (default TERM)
stopwaitsecs=10               ; max num secs to wait b4 SIGKILL (default 10)
;stopasgroup=false             ; send stop signal to the UNIX process group (default false)
;killasgroup=false             ; SIGKILL the UNIX process group (def false)
;user=chrism                   ; setuid to this UNIX account to run the program
;redirect_stderr=true          ; redirect proc stderr to stdout (default false)
;stdout_logfile=/a/path        ; stdout log path, NONE for none; default AUTO
;stdout_logfile_maxbytes=1MB   ; max # logfile bytes b4 rotation (default 50MB)
;stdout_logfile_backups=10     ; # of stdout logfile backups (default 10)
;stdout_capture_maxbytes=1MB   ; number of bytes in "capturemode" (default 0)
;stdout_events_enabled=false   ; emit events on stdout writes (default false)
;stderr_logfile=/a/path        ; stderr log path, NONE for none; default AUTO
;stderr_logfile_maxbytes=1MB   ; max # logfile bytes b4 rotation (default 50MB)
;stderr_logfile_backups=10     ; # of stderr logfile backups (default 10)
;stderr_capture_maxbytes=1MB   ; number of bytes in "capturemode" (default 0)
;stderr_events_enabled=false   ; emit events on stderr writes (default false)
;environment=A="1",B="2"       ; process environment additions (def no adds)
;serverurl=AUTO                ; override serverurl computation (childutils)

; The below sample eventlistener section shows all possible
; eventlistener subsection values, create one or more "real"
; eventlistener: sections to be able to handle event notifications
; sent by supervisor.

;[eventlistener:theeventlistenername]
;command=/bin/eventlistener    ; the program (relative uses PATH, can take args)
;process_name=%(program_name)s ; process_name expr (default %(program_name)s)
;numprocs=1                    ; number of processes copies to start (def 1)
;events=EVENT                  ; event notif. types to subscribe to (req"d)
;buffer_size=10                ; event buffer queue size (default 10)
;directory=/tmp                ; directory to cwd to before exec (def no cwd)
;umask=022                     ; umask for process (default None)
;priority=-1                   ; the relative start priority (default -1)
;autostart=true                ; start at supervisord start (default: true)
;autorestart=unexpected        ; whether/when to restart (default: unexpected)
;startsecs=1                   ; number of secs prog must stay running (def. 1)
;startretries=3                ; max # of serial start failures (default 3)
;exitcodes=0,2                 ; "expected" exit codes for process (default 0,2)
;stopsignal=QUIT               ; signal used to kill process (default TERM)
;stopwaitsecs=10               ; max num secs to wait b4 SIGKILL (default 10)
;stopasgroup=false             ; send stop signal to the UNIX process group (default false)
;killasgroup=false             ; SIGKILL the UNIX process group (def false)
;user=chrism                   ; setuid to this UNIX account to run the program
;redirect_stderr=true          ; redirect proc stderr to stdout (default false)
;stdout_logfile=/a/path        ; stdout log path, NONE for none; default AUTO
;stdout_logfile_maxbytes=1MB   ; max # logfile bytes b4 rotation (default 50MB)
;stdout_logfile_backups=10     ; # of stdout logfile backups (default 10)
;stdout_events_enabled=false   ; emit events on stdout writes (default false)
;stderr_logfile=/a/path        ; stderr log path, NONE for none; default AUTO
;stderr_logfile_maxbytes=1MB   ; max # logfile bytes b4 rotation (default 50MB)
;stderr_logfile_backups        ; # of stderr logfile backups (default 10)
;stderr_events_enabled=false   ; emit events on stderr writes (default false)
;environment=A="1",B="2"       ; process environment additions
;serverurl=AUTO                ; override serverurl computation (childutils)

; The below sample group section shows all possible group values,
; create one or more "real" group: sections to create "heterogeneous"
; process groups.

;[group:thegroupname]
;programs=progname1,progname2  ; each refers to "x" in [program:x] definitions
;priority=999                  ; the relative start priority (default 999)

; The [include] section can just contain the "files" setting.  This
; setting can list multiple files (separated by whitespace or
; newlines).  It can also contain wildcards.  The filenames are
; interpreted as relative to this file.  Included files *cannot*
; include files themselves.

;[include]
;files = relative/directory/*.ini
启动 supervisord

启动 supervisord 的命令如下:

supervisord

使用 supervisorctl 查看 supervisord 相关信息

$ supervisorctl
ds.tools.vip.com                 RUNNING    pid 13794, uptime 0:17:25
supervisor> 

查看 supervisor 的所有命令可以使用 help 帮助命令

 ~]$ supervisorctl
ds.tools.vip.com                 RUNNING    pid 13794, uptime 0:17:25
supervisor> help

default commands (type help ):
=====================================
add    clear  fg        open  quit    remove  restart   start   stop  update 
avail  exit   maintail  pid   reload  reread  shutdown  status  tail  version

查看某个命令的具体用法为 help commandname

supervisor> help start
start             Start a process
start :*         Start all processes in a group
start       Start multiple processes or groups
start all               Start all processes
supervisor> 
XML-RPC API 的使用

通过配置文件所知,我们的配置的 url 如下:

[inet_http_server]         ; inet (TCP) server disabled by default
port=127.0.0.1:9001        ; (ip_address:port specifier, *:port for all iface)
username=ops              ; (default is no username (open server))
password=vipshop               ; (default is no password (open server))

连接 supervisord 的代码示例如下:

import xmlrpclib
server = xmlrpclib.Server("http://ops:vipshop@127.0.0.1:9001/RPC2")

当我们不知道 supervisord 有哪些方法的时候,可以使用如下接口查询出 API 支持的方法

methods = server.system.listMethods()
print methods

输出如下:

>>> print methods
["supervisor.addProcessGroup", "supervisor.clearAllProcessLogs", "supervisor.clearLog", "supervisor.clearProcessLog", "supervisor.clearProcessLogs", "supervisor.getAPIVersion", "supervisor.getAllConfigInfo", "supervisor.getAllProcessInfo", "supervisor.getIdentification", "supervisor.getPID", "supervisor.getProcessInfo", "supervisor.getState", "supervisor.getSupervisorVersion", "supervisor.getVersion", "supervisor.readLog", "supervisor.readMainLog", "supervisor.readProcessLog", "supervisor.readProcessStderrLog", "supervisor.readProcessStdoutLog", "supervisor.reloadConfig", "supervisor.removeProcessGroup", "supervisor.restart", "supervisor.sendProcessStdin", "supervisor.sendRemoteCommEvent", "supervisor.shutdown", "supervisor.startAllProcesses", "supervisor.startProcess", "supervisor.startProcessGroup", "supervisor.stopAllProcesses", "supervisor.stopProcess", "supervisor.stopProcessGroup", "supervisor.tailProcessLog", "supervisor.tailProcessStderrLog", "supervisor.tailProcessStdoutLog", "system.listMethods", "system.methodHelp", "system.methodSignature", "system.multicall"]

注:官方的文档的 XML-RPC API

查看某个进程的详细信息

proInfo = server.supervisor.getProcessInfo("ds.tools.vip.com")
print proInfo

输出如下:

{"now": 1405479228, "group": "ds.tools.vip.com", "description": "pid 13794, uptime 0:25:45", "pid": 13794, "stderr_logfile": "/tmp/ds.tools.vip.com-stderr---supervisor-hWn1G5.log", "stop": 0, "statename": "RUNNING", "start": 1405477683, "state": 20, "stdout_logfile": "/tmp/ds.tools.vip.com-stdout---supervisor-JGiMlV.log", "logfile": "/tmp/ds.tools.vip.com-stdout---supervisor-JGiMlV.log", "exitstatus": 0, "spawnerr": "", "name": "ds.tools.vip.com"}

具体详细的可以参考官方文档,列举的很详细,这只是一个简单的介绍。

文章版权归作者所有,未经允许请勿转载,若此文章存在违规行为,您可以联系管理员删除。

转载请注明本文地址:https://www.ucloud.cn/yun/37312.html

相关文章

  • 论supervisor使用(一)

    摘要:写在前面在写之前提一句,英文好的同学可以直接访问官网,阅读官方文档,本文主要针对个人在使用的时候踩过的一些坑的整理,可能会有一些谬误,欢迎大神们指正,我会回来加以修改,闲言少叙,书归正传。 写在前面   在写之前提一句,英文好的同学可以直接访问官网,阅读官方文档,本文主要针对个人在使用的时候踩过的一些坑的整理, 可能会有一些谬误,欢迎大神们指正,我会回来加以修改,闲言少叙,书归正传。...

    Charles 评论0 收藏0
  • Java 远程通讯技术及原理分析

    摘要:对于与而言,则可以看做是消息传递技术的一种衍生或封装。在生产者通知消费者时,传递的往往是消息或事件,而非生产者自身。通过消息路由,我们可以配置路由规则指定消息传递的路径,以及指定具体的消费者消费对应的生产者。采用和来进行远程对象的通讯。 消息模式 归根结底,企业应用系统就是对数据的处理,而对于一个拥有多个子系统的企业应用系统而言,它的基础支撑无疑就是对消息的处理。与对象不同,消息本质上...

    rozbo 评论0 收藏0
  • 分布式服务框架之远程通讯技术及原理分析

    摘要:微软的虽然引入了事件机制,可以在队列收到消息时触发事件,通知订阅者。由微软作为主要贡献者的,则对以及做了进一层包装,并能够很好地实现这一模式。 在分布式服务框架中,一个最基础的问题就是远程服务是怎么通讯的,在Java领域中有很多可实现远程通讯的技术,例如:RMI、MINA、ESB、Burlap、Hessian、SOAP、EJB和JMS等,这些名词之间到底是些什么关系呢,它们背后到底是基...

    sorra 评论0 收藏0
  • 分布式服务框架之远程通讯技术及原理分析

    摘要:微软的虽然引入了事件机制,可以在队列收到消息时触发事件,通知订阅者。由微软作为主要贡献者的,则对以及做了进一层包装,并能够很好地实现这一模式。 在分布式服务框架中,一个最基础的问题就是远程服务是怎么通讯的,在Java领域中有很多可实现远程通讯的技术,例如:RMI、MINA、ESB、Burlap、Hessian、SOAP、EJB和JMS等,这些名词之间到底是些什么关系呢,它们背后到底是基...

    0xE7A38A 评论0 收藏0

发表评论

0条评论

最新活动
阅读需要支付1元查看
<