摘要:我自己是从商业化环境走出来的,对于开源的部署方案也是在一点一点摸索,我相信其中也必然包含某些坑爹的配置。设置为表示当经常出现错误时可以尝试更改此选项。设置环境变量添加服务设置开机自动启动服务配置其它扩展都可以动态添加,没事的
前言
现在很多朋友都了解或者已经在使用LNMP架构,一般可以理解为Linux Shell为CentOS/RadHat/Fedora/Debian/Ubuntu/等平台安装LNMP(Nginx/MySQL/PHP),LNMPA(Nginx/MySQL/PHP/Apache),LAMP(Apache/MySQL/PHP)等类似的开发或生产环境。我自己是从SuSE/Oracle商业化环境走出来的,对于开源的部署方案也是在一点一点摸索,我相信其中也必然包含某些坑爹的配置。这篇文章较为详细的描述了基于LTMP架构的部署过程,之后会再考虑独立各个模块分享细节和技巧,如果大家有更合适的配置实践手册欢迎一起分享,文章中的错误和改进点也请帮忙指点下哈。
LTMP(CentOS/Tengine/MySQL/PHP)
2015年08月04日 - 初稿
阅读原文 - http://wsgzao.github.io/post/ltmp/
扩展阅读
CentOS - http://www.centos.org/
Tengine - http://tengine.taobao.org/
Nginx - http://nginx.org/en/docs/
MySQL - http://www.mysql.com/
PHP - http://php.net/
CentOS_6.5_64
Tengine-2.1.0
MySQL_5.6.25
PHP_5.5.27
Apache_2.2.31(酱油)
准备工作如果允许公网访问会方便很多
bash#优化History历史记录 vi /etc/bashrc #设置保存历史命令的文件大小 export HISTFILESIZE=1000000000 #保存历史命令条数 export HISTSIZE=1000000 #实时记录历史命令,默认只有在用户退出之后才会统一记录,很容易造成多个用户间的相互覆盖。 export PROMPT_COMMAND="history -a" #记录每条历史命令的执行时间 export HISTTIMEFORMAT="%Y-%m-%d_%H:%M:%S " #设置时区(可选) rm -rf /etc/localtime ln -s /usr/share/zoneinfo/Asia/Shanghai /etc/localtime #禁用NetworkManager(可选) /etc/init.d/NetworkManager stop chkconfig NetworkManager off /etc/init.d/network restart #关闭iptables(可选) /etc/init.d/iptables stop chkconfig iptables off #设置dns(可选) echo "nameserver 114.114.114.114" > /etc/resolv.conf #关闭maildrop #cd /var/spool/postfix/maildrop;ls | xargs rm -rf; sed "s/MAILTO=root/MAILTO=""/g" /etc/crontab service crond restart #关闭selinux setenforce 0 sed -i "s/SELINUX=enforcing/SELINUX=disabled/" /etc/selinux/config #文件打开数量, echo ulimit -SHn 65535 >> /etc/profile source /etc/profile #修改最大进程和最大文件打开数限制 vi /etc/security/limits.conf * soft nproc 11000 * hard nproc 11000 * soft nofile 655350 * hard nofile 655350 sed -i -e "/# End of file/i* soft nofile 65535 * hard nofile 65535" /etc/security/limits.conf #优化TCP vi /etc/sysctl.conf net.ipv4.ip_forward = 0 net.ipv4.conf.default.rp_filter = 1 net.ipv4.conf.default.accept_source_route = 0 kernel.sysrq = 0 kernel.core_uses_pid = 1 #开启SYN Cookies,当出现SYN等待队列溢出时,启用cookies来处理 net.ipv4.tcp_syncookies = 1 kernel.msgmnb = 65536 kernel.msgmax = 65536 kernel.shmmax = 68719476736 kernel.shmall = 4294967296 #timewait的数量,默认是180000 net.ipv4.tcp_max_tw_buckets = 6000 net.ipv4.tcp_sack = 1 net.ipv4.tcp_window_scaling = 1 net.ipv4.tcp_rmem = 4096 87380 4194304 net.ipv4.tcp_wmem = 4096 16384 4194304 net.core.wmem_default = 8388608 net.core.rmem_default = 8388608 net.core.rmem_max = 16777216 net.core.wmem_max = 16777216 #每个网络接口接收数据包的速率比内核处理这些包的速率快时,允许送到队列的数据包的最大数目 net.core.netdev_max_backlog = 262144 #web应用中listen函数的backlog默认会给我们内核参数的net.core.somaxconn限制到128,而nginx定义的NGX_LISTEN_BACKLOG默认为511,所以有必要调整这个值 net.core.somaxconn = 262144 #系统中最多有多少个TCP套接字不被关联到任何一个用户文件句柄上。如果超过这个数字,孤儿连接将即刻被复位并打印出警告信息。这个限制仅仅是为了防止简单的DoS攻击,不能过分依靠它或者人为地减小这个值,更应该增加这个值(如果增加了内存之后) net.ipv4.tcp_max_orphans = 3276800 #记录的那些尚未收到客户端确认信息的连接请求的最大值。对于有128M内存的系统而言,缺省值是1024,小内存的系统则是128 net.ipv4.tcp_max_syn_backlog = 262144 #时间戳可以避免序列号的卷绕。一个1Gbps的链路肯定会遇到以前用过的序列号。时间戳能够让内核接受这种“异常”的数据包。这里需要将其关掉 net.ipv4.tcp_timestamps = 0 #为了打开对端的连接,内核需要发送一个SYN并附带一个回应前面一个SYN的ACK。也就是所谓三次握手中的第二次握手。这个设置决定了内核放弃连接之前发送SYN+ACK包的数量 net.ipv4.tcp_synack_retries = 1 #在内核放弃建立连接之前发送SYN包的数量 net.ipv4.tcp_syn_retries = 1 #启用timewait快速回收 net.ipv4.tcp_tw_recycle = 1 #开启重用,允许将TIME-WAIT sockets重新用于新的TCP连接 net.ipv4.tcp_tw_reuse = 1 net.ipv4.tcp_mem = 94500000 915000000 927000000 #如果套接字由本端要求关闭,这个参数决定了它保持在FIN-WAIT-2状态的时间。对端可以出错并永远不关闭连接,甚至意外当机。缺省值是60 秒。2.2 内核的通常值是180秒,你可以按这个设置,但要记住的是,即使你的机器是一个轻载的WEB服务器,也有因为大量的死套接字而内存溢出的风险,FIN- WAIT-2的危险性比FIN-WAIT-1要小,因为它最多只能吃掉1.5K内存,但是它们的生存期长些。 net.ipv4.tcp_fin_timeout = 1 #当keepalive起用的时候,TCP发送keepalive消息的频度。缺省是2小时。 net.ipv4.tcp_keepalive_time = 30 #允许系统打开的端口范围 net.ipv4.ip_local_port_range = 1024 65000 #表示文件句柄的最大数量 fs.file-max = 102400 #云主机上的优化 # Kernel sysctl configuration file for Red Hat Linux # # For binary values, 0 is disabled, 1 is enabled. See sysctl(8) and # sysctl.conf(5) for more details. # Controls IP packet forwarding net.ipv4.ip_forward = 0 # Controls source route verification net.ipv4.conf.default.rp_filter = 1 # Do not accept source routing net.ipv4.conf.default.accept_source_route = 0 # Controls the System Request debugging functionality of the kernel # Controls whether core dumps will append the PID to the core filename. # Useful for debugging multi-threaded applications. kernel.core_uses_pid = 1 # Controls the use of TCP syncookies net.ipv4.tcp_syncookies = 1 # Disable netfilter on bridges. net.bridge.bridge-nf-call-ip6tables = 0 net.bridge.bridge-nf-call-iptables = 0 net.bridge.bridge-nf-call-arptables = 0 # Controls the default maxmimum size of a mesage queue kernel.msgmnb = 65536 # Controls the maximum size of a message, in bytes kernel.msgmax = 65536 # Controls the maximum shared segment size, in bytes kernel.shmmax = 68719476736 # Controls the maximum number of shared memory segments, in pages kernel.shmall = 4294967296 net.ipv4.conf.all.send_redirects = 0 net.ipv4.conf.default.send_redirects = 0 net.ipv4.conf.all.secure_redirects = 0 net.ipv4.conf.default.secure_redirects = 0 net.ipv4.conf.all.accept_redirects = 0 net.ipv4.conf.default.accept_redirects = 0 net.ipv4.conf.all.send_redirects = 0 net.ipv4.conf.default.send_redirects = 0 net.ipv4.conf.all.secure_redirects = 0 net.ipv4.conf.default.secure_redirects = 0 net.ipv4.conf.all.accept_redirects = 0 net.ipv4.conf.default.accept_redirects = 0 net.netfilter.nf_conntrack_max = 1000000 kernel.unknown_nmi_panic = 0 kernel.sysrq = 0 fs.file-max = 1000000 vm.swappiness = 10 fs.inotify.max_user_watches = 10000000 net.core.wmem_max = 327679 net.core.rmem_max = 327679 net.ipv4.conf.all.send_redirects = 0 net.ipv4.conf.default.send_redirects = 0 net.ipv4.conf.all.secure_redirects = 0 net.ipv4.conf.default.secure_redirects = 0 net.ipv4.conf.all.accept_redirects = 0 net.ipv4.conf.default.accept_redirects = 0 /sbin/sysctl -p #自动选择最快的yum源 yum -y install yum-fastestmirror #移除系统自带的rpm包的http mysql php #yum remove httpd* php* yum remove httpd mysql mysql-server php php-cli php-common php-devel php-gd -y #升级基础库 yum install -y wget gcc gcc-c++ openssl* curl curl-devel libxml2 libxml2-devel glibc glibc-devel glib2 glib2-devel gd gd2 gd-devel gd2-devel libaio autoconf libjpeg libjpeg-devel libpng libpng-devel freetype freetype-devel #yum安装基础必备环境包,可以先将yum源更换为阿里云的源 阿里:http://mirrors.aliyun.com/ 搜狐:http://mirrors.sohu.com/ 网易:http://mirrors.163.com/ #备份原先的yum源信息 mv /etc/yum.repos.d/CentOS-Base.repo /etc/yum.repos.d/CentOS-Base.repo.backup #从阿里云镜像站下载centos6的repo wget -O /etc/yum.repos.d/CentOS-Base.repo http://mirrors.aliyun.com/repo/Centos-6.repo #最后yum重新生成缓存 yum makecache #yum安装软件包(可选) yum -y install tar zip unzip openssl* gd gd-devel gcc gcc-c++ autoconf libjpeg libjpeg-devel libpng libpng-devel freetype freetype-devel libxml2 libxml2-devel zlib zlib-devel glibc glibc-devel glib2 glib2-devel bzip2 bzip2-devel ncurses ncurses-devel curl curl-devel e2fsprogs e2fsprogs-devel krb5 krb5-devel libidn libidn-devel openssl openssl-devel openldap openldap-devel openldap-clients openldap-servers make libmcrypt libmcrypt-devel fontconfig fontconfig-devel libXpm* libtool* libxml2 libxml2-devel t1lib t1lib-devel #定义目录结构,下载安装包 mkdir -p /app/{local,data} cd /app/local #PCRE - Perl Compatible Regular Expressions wget "ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/pcre-8.37.tar.gz" #Tengine wget "http://tengine.taobao.org/download/tengine-2.1.0.tar.gz" #MySQL wget "https://downloads.mariadb.com/archives/mysql-5.6/mysql-5.6.25-linux-glibc2.5-x86_64.tar.gz" #PHP wget "http://cn2.php.net/distributions/php-5.6.11.tar.gz" #Mhash wget "http://downloads.sourceforge.net/mhash/mhash-0.9.9.9.tar.gz" #libmcrypt wget "http://downloads.sourceforge.net/mcrypt/libmcrypt-2.5.8.tar.gz" #Mcrypt wget "http://downloads.sourceforge.net/mcrypt/mcrypt-2.6.8.tar.gz"配置Tengine 安装PCRE
bashtar zxvf pcre-8.37.tar.gz cd pcre-8.37 ./configure make && make install cd ../安装Tengine
bash#添加www用户和组 groupadd www useradd -g www www #安装Tengine tar zxvf tengine-2.1.0.tar.gz cd tengine-2.1.0 ./configure --user=www --group=www --prefix=/app/local/nginx --with-http_stub_status_module --with-http_ssl_module --with-pcre=/app/local/pcre-8.37 make && make install cd ../配置Nginx
Nginx配置文件的优化很重要,理解每一步的意义
bash#修改nginx.conf vi /app/local/nginx/conf/nginx.conf #用户和用户组 user www www; #工作进程,一般可以按CPU核数设定 worker_processes auto; worker_cpu_affinity auto; #全局错误日志级别 # [ debug | info | notice | warn | error | crit ] error_log logs/error.log error; #PID文件位置 pid logs/nginx.pid; #更改worker进程的最大打开文件数限制,避免"too many open files" worker_rlimit_nofile 65535; #events事件指令是设定Nginx的工作模式及连接数上限 events{ #epoll是Linux首选的高效工作模式 use epoll; #告诉nginx收到一个新连接通知后接受尽可能多的连接 multi_accept on; #用于定义Nginx每个进程的最大连接数 worker_connections 65536; } #HTTP模块控制着nginx http处理的所有核心特性 http { include mime.types; #设置文件使用的默认的MIME-type default_type application/octet-stream; #对日志格式的设定,main为日志格式别名 log_format main "$remote_addr - $remote_user [$time_local] "$request" " "$status $body_bytes_sent "$http_referer" " ""$http_user_agent" "$http_x_forwarded_for""; #设置nginx是否将存储访问日志。关闭这个选项可以让读取磁盘IO操作更快 access_log off; # access_log logs/access.log main buffer=16k; #开启gzip压缩,实时压缩输出数据流 gzip on; #设置IE6或者更低版本禁用gzip功能 gzip_disable "MSIE [1-6]."; #前端的缓存服务器缓存经过gzip压缩的页面 gzip_vary on; #允许压缩基于请求和响应的响应流 gzip_proxied any; #设置数据的压缩等级 gzip_comp_level 4; #设置对数据启用压缩的最少字节数 gzip_min_length 1k; #表示申请16个单位为64K的内存作为压缩结果流缓存 gzip_buffers 16 64k; #用于设置识别HTTP协议版本 gzip_http_version 1.1; #用来指定压缩的类型 gzip_types text/plain text/css application/json application/x-javascript text/xml application/xml application/xml+rss text/javascript; #打开缓存的同时也指定了缓存最大数目,以及缓存的时间 open_file_cache max=200000 inactive=20s; #在open_file_cache中指定检测正确信息的间隔时间 open_file_cache_valid 30s; #定义了open_file_cache中指令参数不活动时间期间里最小的文件数 open_file_cache_min_uses 2; #指定了当搜索一个文件时是否缓存错误信息,也包括再次给配置中添加文件 open_file_cache_errors on; #设置允许客户端请求的最大的单个文件字节数 client_max_body_size 30M; #设置客户端请求主体读取超时时间 client_body_timeout 10; #设置客户端请求头读取超时时间 client_header_timeout 10; #指定来自客户端请求头的headerbuffer大小 client_header_buffer_size 32k; #设置客户端连接保持活动的超时时间 keepalive_timeout 60; #关闭不响应的客户端连接 reset_timedout_connection on; #设置响应客户端的超时时间 send_timeout 10; #开启高效文件传输模式 sendfile on; #告诉nginx在一个数据包里发送所有头文件,而不一个接一个的发送 tcp_nopush on; #告诉nginx不要缓存数据,而是一段一段的发送 tcp_nodelay on; #设置用于保存各种key(比如当前连接数)的共享内存的参数 limit_conn_zone $binary_remote_addr zone=addr:5m; #给定的key设置最大连接数,允许每一个IP地址最多同时打开有100个连接 limit_conn addr 100; #FastCGI相关参数是为了改善网站的性能:减少资源占用,提高访问速度 fastcgi_buffers 256 16k; fastcgi_buffer_size 128k; fastcgi_connect_timeout 3s; fastcgi_send_timeout 120s; fastcgi_read_timeout 120s; server_names_hash_bucket_size 128; #不在error_log中记录不存在的错误 log_not_found off; #关闭在错误页面中的nginx版本数字,提高安全性 #server_tag Apache; server_tokens off; #tengine server_tag off; server_info off; #添加虚拟主机的配置文件 include vhosts/*.conf; #负载均衡配置(暂时略过) #upstream test.com #设定虚拟主机配置 server { #侦听80端口 listen 80; #定义使用localhost访问 server_name localhost; #定义首页索引文件的名称 index index.html index.htm index.php; #定义服务器的默认网站根目录位置 root /app/data/localhost/; #定义错误提示页面 error_page 404 /404.html; error_page 500 502 503 504 /50x.html; location = /50x.html { root html; } #PHP 脚本请求全部转发到 FastCGI处理. 使用FastCGI默认配置. location ~ .*.(php|php5)?$ { fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; include fastcgi.conf; } #静态文件 location ~ .*.(gif|jpg|jpeg|png|bmp|swf|ico)$ { #过期30天,频繁更新可设置小一点 expires 30d; } location ~ .*.(js|css)?$ { #过期1小时,不更新可设置大一些 expires 1h; } #禁止访问 location ~ /. { deny all; } } }
简化配置文件
vi /app/local/nginx/conf/nginx.conf
bash
user www www; worker_processes auto; worker_cpu_affinity auto; error_log logs/error.log crit; pid logs/nginx.pid; worker_rlimit_nofile 51200; events { use epoll; multi_accept on; worker_connections 51200; } http { include mime.types; default_type application/octet-stream; log_format main "$remote_addr - $remote_user [$time_local] "$request" " "$status $body_bytes_sent "$http_referer" " ""$http_user_agent" "$http_x_forwarded_for""; access_log off; #access_log logs/access.log main buffer=16k; server_names_hash_bucket_size 128; client_header_buffer_size 32k; large_client_header_buffers 4 32k; client_max_body_size 50M; sendfile on; tcp_nopush on; tcp_nodelay on; keepalive_timeout 60; server_tokens off; server_tag off; server_info off; fastcgi_connect_timeout 300; fastcgi_send_timeout 300; fastcgi_read_timeout 300; fastcgi_buffer_size 64k; fastcgi_buffers 4 64k; fastcgi_busy_buffers_size 128k; fastcgi_temp_file_write_size 256k; #gzip on; #gzip_min_length 1k; #gzip_buffers 4 16k; #gzip_http_version 1.1; #gzip_comp_level 5; #gzip_types text/plain application/x-javascript text/css application/xml; #gzip_vary on; include vhosts/*.conf; }
分离server写入vhosts
mkdir -p /app/local/nginx/conf/vhosts/
vi /app/local/nginx/conf/vhosts/localhost.conf
bashserver { listen 80; server_name localhost; index index.php index.html index.htm; access_log logs/localhost.log main; root /app/data/localhost/; location / { index index.php index.html index.htm; } #error_page 404 /404.html; #error_page 500 502 503 504 /50x.html; location = /50x.html { root html; } location ~ .*.(php|php5)?$ { fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; #fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi.conf; } location ~ .*.(gif|jpg|jpeg|png|bmp|swf|ico)$ { expires 30d; } location ~ .*.(js|css)?$ { expires 1h; } location ~ /. { deny all; } }
bash#检查语法 /app/local/nginx/sbin/nginx -t # ./nginx -t the configuration file /app/local/nginx/conf/nginx.conf syntax is ok configuration file /app/local/nginx/conf/nginx.conf test is successful #测试用例 mkdir -p /app/data/localhost chmod +w /app/data/localhost echo "" > /app/data/localhost/phpinfo.php chown -R www:www /app/data/localhost #设置nginx系统变量 echo "export PATH=$PATH:/app/local/nginx/sbin">>/etc/profile && source /etc/profile #测试访问 curl -I http://localhost HTTP/1.1 200 OK Server: Tengine/2.1.0 Date: Mon, 27 Jul 2015 06:42:25 GMT Content-Type: text/html; charset=UTF-8 Connection: keep-alive X-Powered-By: PHP/5.6.11添加Tengine到服务
配置服务后便于统一管理
vi /etc/rc.d/init.d/nginx
bash#!/bin/sh # Source function library. . /etc/rc.d/init.d/functions # Source networking configuration. . /etc/sysconfig/network # Check that networking is up. [ "$NETWORKING" = "no" ] && exit 0 nginx="/app/local/nginx/sbin/nginx" prog=$(basename $nginx) NGINX_CONF_FILE="/app/local/nginx/conf/nginx.conf" [ -f /etc/sysconfig/nginx ] && . /etc/sysconfig/nginx lockfile=/var/lock/subsys/nginx make_dirs() { # make required directories user=`$nginx -V 2>&1 | grep "configure arguments:" | sed "s/[^*]*--user=([^ ]*).*/1/g" -` if [ -z "`grep $user /etc/passwd`" ]; then useradd -M -s /bin/nologin $user fi options=`$nginx -V 2>&1 | grep "configure arguments:"` for opt in $options; do if [ `echo $opt | grep ".*-temp-path"` ]; then value=`echo $opt | cut -d "=" -f 2` if [ ! -d "$value" ]; then # echo "creating" $value mkdir -p $value && chown -R $user $value fi fi done } start() { [ -x $nginx ] || exit 5 [ -f $NGINX_CONF_FILE ] || exit 6 make_dirs echo -n $"Starting $prog: " daemon $nginx -c $NGINX_CONF_FILE retval=$? echo [ $retval -eq 0 ] && touch $lockfile return $retval } stop() { echo -n $"Stopping $prog: " killproc $prog -QUIT retval=$? echo [ $retval -eq 0 ] && rm -f $lockfile return $retval } restart() { configtest || return $? stop sleep 1 start } reload() { configtest || return $? echo -n $"Reloading $prog: " killproc $nginx -HUP RETVAL=$? echo } force_reload() { restart } configtest() { $nginx -t -c $NGINX_CONF_FILE } rh_status() { status $prog } rh_status_q() { rh_status >/dev/null 2>&1 } case "$1" in start) rh_status_q && exit 0 $1 ;; stop) rh_status_q || exit 0 $1 ;; restart|configtest) $1 ;; reload) rh_status_q || exit 7 $1 ;; force-reload) force_reload ;; status) rh_status ;; condrestart|try-restart) rh_status_q || exit 0 ;; *) echo $"Usage: $0 {start|stop|status|restart|condrestart|try-restart|reload|force-reload|configtest}" exit 2 esac
bash#修改执行权限 chmod +x /etc/init.d/nginx ulimit -SHn 65535 service nginx start安装MySQL
注意目录和字符集等配置文件
bash#解压mysql mkdir -p /app/local/mysql tar zxvf mysql-5.6.25-linux-glibc2.5-x86_64.tar.gz mv mysql-5.6.25-linux-glibc2.5-x86_64/* /app/local/mysql #增加mysql用户组 groupadd mysql useradd -g mysql mysql mkdir -p /app/data/mysql/data/ mkdir -p /app/data/mysql/binlog/ mkdir -p /app/data/mysql/relaylog/ chown -R mysql:mysql /app/data/mysql/ #安装mysql /app/local/mysql/scripts/mysql_install_db --basedir=/app/local/mysql --datadir=/app/data/mysql/data --user=mysql #修改mysqld_safe配置路径 sed -i "s#/usr/local/mysql#/app/local/mysql#g" /app/local/mysql/bin/mysqld_safe
bash
#修改my.cnf配置文件 vi /app/local/mysql/my.cnf [client] character-set-server = utf8 port = 3306 socket = /tmp/mysql.sock [mysql] #prompt="(u:HOSTNAME:)[d]> " prompt="u@h R:m:s [d]> " no-auto-rehash [mysqld] server-id = 1 port = 3306 user = mysql basedir = /app/local/mysql datadir = /app/data/mysql/data socket = /tmp/mysql.sock log-error = /app/data/mysql/mysql_error.log pid-file = /app/data/mysql/mysql.pid sql_mode=NO_ENGINE_SUBSTITUTION,STRICT_TRANS_TABLES default-storage-engine = InnoDB max_connections = 512 max_connect_errors = 100000 table_open_cache = 512 external-locking = FALSE max_allowed_packet = 32M slow_query_log = 1 slow_query_log_file = /app/data/mysql/slow.log open_files_limit = 10240 back_log = 600 join_buffer_size = 2M read_rnd_buffer_size = 16M sort_buffer_size = 2M thread_cache_size = 300 query_cache_size = 128M query_cache_limit = 2M query_cache_min_res_unit = 2k thread_stack = 192K transaction_isolation = READ-COMMITTED tmp_table_size = 246M max_heap_table_size = 246M long_query_time = 3 log-slave-updates log-bin = /app/data/mysql/binlog/binlog sync_binlog = 1 binlog_cache_size = 4M binlog_format = MIXED max_binlog_cache_size = 8M max_binlog_size = 1G relay-log-index = /app/data/mysql/relaylog/relaylog relay-log-info-file = /app/data/mysql/relaylog/relaylog relay-log = /app/data/mysql/relaylog/relaylog expire_logs_days = 7 key_buffer_size = 128M read_buffer_size = 1M read_rnd_buffer_size = 16M bulk_insert_buffer_size = 64M myisam_sort_buffer_size = 128M myisam_max_sort_file_size = 10G myisam_repair_threads = 1 myisam_recover innodb_additional_mem_pool_size = 16M innodb_buffer_pool_size = 256M innodb_data_file_path = ibdata1:1024M:autoextend innodb_flush_log_at_trx_commit = 1 innodb_log_buffer_size = 16M innodb_log_file_size = 256M innodb_log_files_in_group = 2 innodb_max_dirty_pages_pct = 50 innodb_file_per_table = 1 innodb_locks_unsafe_for_binlog = 0 interactive_timeout = 120 wait_timeout = 120 skip-name-resolve slave-skip-errors = 1032,1062,126,1114,1146,1048,1396 [mysqldump] quick max_allowed_packet = 32M
bash
#添加mysql到服务 vi /etc/rc.d/init.d/mysqld #!/bin/sh basedir=/app/local/mysql datadir=/app/data/mysql/data service_startup_timeout=900 lockdir="/var/lock/subsys" lock_file_path="$lockdir/mysql" mysqld_pid_file_path=/app/data/mysql/mysql.pid if test -z "$basedir" then basedir=/usr/local/mysql bindir=/usr/local/mysql/bin if test -z "$datadir" then datadir=/usr/local/mysql/data fi sbindir=/usr/local/mysql/bin libexecdir=/usr/local/mysql/bin else bindir="$basedir/bin" if test -z "$datadir" then datadir="$basedir/data" fi sbindir="$basedir/sbin" libexecdir="$basedir/libexec" fi datadir_set= lsb_functions="/lib/lsb/init-functions" if test -f $lsb_functions ; then . $lsb_functions else log_success_msg() { echo " SUCCESS! $@" } log_failure_msg() { echo " ERROR! $@" } fi PATH="/sbin:/usr/sbin:/bin:/usr/bin:$basedir/bin" export PATH mode=$1 # start or stop [ $# -ge 1 ] && shift other_args="$*" # uncommon, but needed when called from an RPM upgrade action # Expected: "--skip-networking --skip-grant-tables" # They are not checked here, intentionally, as it is the resposibility # of the "spec" file author to give correct arguments only. case `echo "testingc"`,`echo -n testing` in *c*,-n*) echo_n= echo_c= ;; *c*,*) echo_n=-n echo_c= ;; *) echo_n= echo_c="c" ;; esac parse_server_arguments() { for arg do case "$arg" in --basedir=*) basedir=`echo "$arg" | sed -e "s/^[^=]*=//"` bindir="$basedir/bin" if test -z "$datadir_set"; then datadir="$basedir/data" fi sbindir="$basedir/sbin" libexecdir="$basedir/libexec" ;; --datadir=*) datadir=`echo "$arg" | sed -e "s/^[^=]*=//"` datadir_set=1 ;; --pid-file=*) mysqld_pid_file_path=`echo "$arg" | sed -e "s/^[^=]*=//"` ;; --service-startup-timeout=*) service_startup_timeout=`echo "$arg" | sed -e "s/^[^=]*=//"` ;; esac done } wait_for_pid () { verb="$1" # created | removed pid="$2" # process ID of the program operating on the pid-file pid_file_path="$3" # path to the PID file. i=0 avoid_race_condition="by checking again" while test $i -ne $service_startup_timeout ; do case "$verb" in "created") # wait for a PID-file to pop into existence. test -s "$pid_file_path" && i="" && break ;; "removed") # wait for this PID-file to disappear test ! -s "$pid_file_path" && i="" && break ;; *) echo "wait_for_pid () usage: wait_for_pid created|removed pid pid_file_path" exit 1 ;; esac # if server isn"t running, then pid-file will never be updated if test -n "$pid"; then if kill -0 "$pid" 2>/dev/null; then : # the server still runs else # The server may have exited between the last pid-file check and now. if test -n "$avoid_race_condition"; then avoid_race_condition="" continue # Check again. fi # there"s nothing that will affect the file. log_failure_msg "The server quit without updating PID file ($pid_file_path)." return 1 # not waiting any more. fi fi echo $echo_n ".$echo_c" i=`expr $i + 1` sleep 1 done if test -z "$i" ; then log_success_msg return 0 else log_failure_msg return 1 fi } # Get arguments from the my.cnf file, # the only group, which is read from now on is [mysqld] if test -x ./bin/my_print_defaults then print_defaults="./bin/my_print_defaults" elif test -x $bindir/my_print_defaults then print_defaults="$bindir/my_print_defaults" elif test -x $bindir/mysql_print_defaults then print_defaults="$bindir/mysql_print_defaults" else # Try to find basedir in /etc/my.cnf conf=/etc/my.cnf print_defaults= if test -r $conf then subpat="^[^=]*basedir[^=]*=(.*)$" dirs=`sed -e "/$subpat/!d" -e "s//1/" $conf` for d in $dirs do d=`echo $d | sed -e "s/[ ]//g"` if test -x "$d/bin/my_print_defaults" then print_defaults="$d/bin/my_print_defaults" break fi if test -x "$d/bin/mysql_print_defaults" then print_defaults="$d/bin/mysql_print_defaults" break fi done fi # Hope it"s in the PATH ... but I doubt it test -z "$print_defaults" && print_defaults="my_print_defaults" fi # # Read defaults file from "basedir". If there is no defaults file there # check if it"s in the old (depricated) place (datadir) and read it from there # extra_args="" if test -r "$basedir/my.cnf" then extra_args="-e $basedir/my.cnf" else if test -r "$datadir/my.cnf" then extra_args="-e $datadir/my.cnf" fi fi parse_server_arguments `$print_defaults $extra_args mysqld server mysql_server mysql.server` # # Set pid file if not given # if test -z "$mysqld_pid_file_path" then mysqld_pid_file_path=$datadir/`hostname`.pid else case "$mysqld_pid_file_path" in /* ) ;; * ) mysqld_pid_file_path="$datadir/$mysqld_pid_file_path" ;; esac fi case "$mode" in "start") # Start daemon # Safeguard (relative paths, core dumps..) cd $basedir echo $echo_n "Starting MySQL" if test -x $bindir/mysqld_safe then # Give extra arguments to mysqld with the my.cnf file. This script # may be overwritten at next upgrade. $bindir/mysqld_safe --datadir="$datadir" --pid-file="$mysqld_pid_file_path" $other_args >/dev/null 2>&1 & wait_for_pid created "$!" "$mysqld_pid_file_path"; return_value=$? # Make lock for RedHat / SuSE if test -w "$lockdir" then touch "$lock_file_path" fi exit $return_value else log_failure_msg "Couldn"t find MySQL server ($bindir/mysqld_safe)" fi ;; "stop") # Stop daemon. We use a signal here to avoid having to know the # root password. if test -s "$mysqld_pid_file_path" then mysqld_pid=`cat "$mysqld_pid_file_path"` if (kill -0 $mysqld_pid 2>/dev/null) then echo $echo_n "Shutting down MySQL" kill $mysqld_pid # mysqld should remove the pid file when it exits, so wait for it. wait_for_pid removed "$mysqld_pid" "$mysqld_pid_file_path"; return_value=$? else log_failure_msg "MySQL server process #$mysqld_pid is not running!" rm "$mysqld_pid_file_path" fi # Delete lock for RedHat / SuSE if test -f "$lock_file_path" then rm -f "$lock_file_path" fi exit $return_value else log_failure_msg "MySQL server PID file could not be found!" fi ;; "restart") # Stop the service and regardless of whether it was # running or not, start it again. if $0 stop $other_args; then $0 start $other_args else log_failure_msg "Failed to stop running server, so refusing to try to start." exit 1 fi ;; "reload"|"force-reload") if test -s "$mysqld_pid_file_path" ; then read mysqld_pid < "$mysqld_pid_file_path" kill -HUP $mysqld_pid && log_success_msg "Reloading service MySQL" touch "$mysqld_pid_file_path" else log_failure_msg "MySQL PID file could not be found!" exit 1 fi ;; "status") # First, check to see if pid file exists if test -s "$mysqld_pid_file_path" ; then read mysqld_pid < "$mysqld_pid_file_path" if kill -0 $mysqld_pid 2>/dev/null ; then log_success_msg "MySQL running ($mysqld_pid)" exit 0 else log_failure_msg "MySQL is not running, but PID file exists" exit 1 fi else # Try to find appropriate mysqld process mysqld_pid=`pidof $libexecdir/mysqld` # test if multiple pids exist pid_count=`echo $mysqld_pid | wc -w` if test $pid_count -gt 1 ; then log_failure_msg "Multiple MySQL running but PID file could not be found ($mysqld_pid)" exit 5 elif test -z $mysqld_pid ; then if test -f "$lock_file_path" ; then log_failure_msg "MySQL is not running, but lock file ($lock_file_path) exists" exit 2 fi log_failure_msg "MySQL is not running" exit 3 else log_failure_msg "MySQL is running but PID file could not be found" exit 4 fi fi ;; *) # usage basename=`basename "$0"` echo "Usage: $basename {start|stop|restart|reload|force-reload|status} [ MySQL server options ]" exit 1 ;; esac exit 0
bash#修改权限 chmod +x /etc/init.d/mysqld service mysqld start #增加MySQL系统环境变量 echo "export PATH=$PATH:/app/local/mysql/bin">>/etc/profile && source /etc/profile #查看错误日志 tail -f /var/log/mysqld.log #用root账户登录并作简单的安全设置 /app/local/mysql/bin/mysql -uroot -p
sql#修改root密码 UPDATE mysql.user SET Password=password("root") WHERE User="root"; #删除无名用户 DELETE FROM mysql.user WHERE User=""; #删除root远程访问 DELETE FROM mysql.user WHERE User="root" AND Host NOT IN ("localhost", "127.0.0.1", "::1"); #删除“test”数据库 DROP database test; #允许远程访问 /app/local/mysql/bin/mysql -uroot -proot use mysql; update user set host="%" where user="root" AND host="localhost"; FLUSH PRIVILEGES; select host, user from user; #立即生效并退出MYSQL命令窗体 FLUSH PRIVILEGES;QUIT;安装Apache
bashcd /app/local tar zxvf httpd-2.2.29.tar.gz cd httpd-2.2.29 ./configure --prefix=/app/local/apache --enable-so --enable-rewrite --enable-modes-shared=most make && make install vi /app/local/apache/conf/httpd.conf #修改主机名 ServerName localhost:80 #查找AddType application/x-gzip .gz .tgz,在该行下面添加 AddType application/x-httpd-php .php #查找DirectoryIndex index.html 把该行修改成 DirectoryIndex index.html index.htm index.php /app/local/apache/bin/apachectl -t cp /app/local/apache/bin/apachectl /etc/init.d/httpd安装PHP PHP基础环境
bash#yum安装或者使用下面源包编译安装 yum install libmcrypt libmcrypt-devel mcrypt mhash #下载地址 http://sourceforge.net/projects/mcrypt/files/Libmcrypt/ http://sourceforge.net/projects/mcrypt/files/MCrypt/ http://sourceforge.net/projects/mhash/files/mhash/ #安装Libmcrypt tar -zxvf libmcrypt-2.5.8.tar.gz cd libmcrypt-2.5.8 ./configure make && make install cd ../ 3.安装mhash tar -zxvf mhash-0.9.9.9.tar.gz cd mhash-0.9.9.9 ./configure make && make install cd ../ 4.安装mcrypt tar -zxvf mcrypt-2.6.8.tar.gz cd mcrypt-2.6.8 LD_LIBRARY_PATH=/usr/local/lib ./configure make && make install cd ../ ### 安装PHP >extension根据需要定制,新增的OPcache建议暂时不要开启 ``` bash tar zxvf php-5.5.27.tar.gz cd php-5.5.27 ./configure --prefix=/app/local/php --with-config-file-path=/app/local/php/etc --enable-fpm --enable-mbstring --with-mhash --with-mcrypt --with-curl --with-openssl --with-mysql=mysqlnd --with-mysqli=mysqlnd --with-pdo-mysql=mysqlnd --with-apxs2=/app/local/apache/bin/apxs #--enable-opcache make && make install #配置php.ini cp php.ini-development /app/local/php/etc/php.ini #设置时区 sed -i "s#;date.timezone =#date.timezone = Asia/Shanghai#g" /app/local/php/etc/php.ini #防止nginx文件类型错误解析漏洞 sed -i "s#;cgi.fix_pathinfo=1#cgi.fix_pathinfo=0#g" /app/local/php/etc/php.ini #禁止显示php版本的信息 sed -i "s#expose_php = On#expose_php = Off#g" /app/local/php/etc/php.ini #禁用危险函数(可选) #sed -i "s#disable_functions =#disable_functions = exec,passthru,shell_exec,system,proc_open,popen,curl_exec,curl_multi_exec,parse_ini_file,show_source#g" /app/local/php/etc/php.ini #enable-opcache后设置(可选) [OPcache] zend_extension = opcache.so opcache.enable=1 opcache.memory_consumption = 64 opcache.interned_strings_buffer = 8 opcache.max_accelerated_files = 4000 opcache.revalidate_freq = 60 opcache.fast_shutdown = 1 opcache.enable_cli = 1配置php-fpm
bash#编辑php-fpm cp /app/local/php/etc/php-fpm.conf.default /app/local/php/etc/php-fpm.conf vi /app/local/php/etc/php-fpm.conf [global] ;错误日志 error_log = log/php-fpm.log ;错误日志级别 log_level = notice [www] ;php-fpm监听端口 listen = 127.0.0.1:9000 ;启动进程的帐户和组 user = www group = www ;如果选择static,则由pm.max_children指定固定的子进程数。如果选择dynamic,则由后面3个参数动态决定 pm = dynamic ;子进程最大数 pm.max_children = 384 ;启动时的进程数 pm.start_servers = 20 ;保证空闲进程数最小值,如果空闲进程小于此值,则创建新的子进程 pm.min_spare_servers = 5 ;保证空闲进程数最大值,如果空闲进程大于此值,此进行清理 pm.max_spare_servers = 35 ;设置每个子进程重生之前服务的请求数。对于可能存在内存泄漏的第三方模块来说是非常有用的。如果设置为 "0" 则一直接受请求。等同于 PHP_FCGI_MAX_REQUESTS 环境变量。默认值: 0。 pm.max_requests = 1000 ;每个子进程闲置多长时间就自杀 pm.process_idle_timeout = 10s ;设置单个请求的超时中止时间。该选项可能会对php.ini设置中的"max_execution_time"因为某些特殊原因没有中止运行的脚本有用。设置为 "0" 表示 "Off".当经常出现502错误时可以尝试更改此选项。 request_terminate_timeout = 120 ;当一个请求该设置的超时时间后,就会将对应的PHP调用堆栈信息完整写入到慢日志中。设置为 "0" 表示 "Off" request_slowlog_timeout = 3s ;慢请求的记录日志,配合request_slowlog_timeout使用 slowlog = /app/local/php/var/log/php-fpm.slow.log ;设置文件打开描述符的rlimit限制。默认值: 系统定义值默认可打开句柄是1024,可使用 ulimit -n查看,ulimit -n 2048修改。 rlimit_files = 65535
bash配置memcache/mongo/redis
#设置php环境变量 echo "export PATH=$PATH:/app/local/php/bin">>/etc/profile && source /etc/profile touch /app/local/php/var/log/php-fpm.slow.log #添加php-fpm服务 cp /app/local/php-5.5.27/sapi/fpm/init.d.php-fpm /etc/rc.d/init.d/php-fpm chmod +x /etc/rc.d/init.d/php-fpm service php-fpm start #设置开机自动启动服务 vi /etc/rc.local ulimit -SHn 65535 service php-fpm start service nginx start service mysqld start
其它extension扩展都可以动态添加,没事的
bash#memcache cd /app/local tar zxvf memcache-3.0.8.tgz cd memcache-3.0.8 /app/local/php/bin/phpize ./configure --enable-memcache --with-php-config=/app/local/php/bin/php-config --with-zlib-dir make && make install #mongo cd /app/local tar zxvf mongo-1.6.10.tgz cd mongo-1.6.10 /app/local/php/bin/phpize ./configure --with-php-config=/app/local/php/bin/php-config make && make install #redis cd /app/local tar zxvf redis-2.2.7.tgz cd redis-2.2.7 /app/local/php/bin/phpize ./configure --with-php-config=/app/local/php/bin/php-config make && make install #php.ini vi /app/local/php/etc/php.ini [memcached] extension=memcached.so [mongodb] extension=mongo.so [redis] extension=redis.so #重启生效 service php-fpm restart php -i | grep php.ini php -m自动化部署
服务器的上传目录可以自定义,安装目录默认统一修改为/app/{local,data},执行脚本为web.sh
bashfile://E:QQDownloadLTMP (2 folders, 5 files, 27.66 MB, 30.76 MB in total.) │ httpd-2.2.29.tar.gz 7.19 MB │ pcre-8.37.tar.gz 1.95 MB │ php-5.5.27.tar.gz 16.95 MB │ tengine-2.1.0.tar.gz 1.58 MB │ web.sh 4.10 KB ├─init (1 folders, 12 files, 91.42 KB, 92.23 KB in total.) │ │ allow.conf 35 bytes │ │ bashrc 2.99 KB │ │ deny.conf 35 bytes │ │ limits.conf 1.86 KB │ │ my.cnf 1.99 KB │ │ mysqld 8.39 KB │ │ nginx 2.22 KB │ │ nginx.conf 1.34 KB │ │ php-fpm 2.30 KB │ │ php-fpm.conf 416 bytes │ │ php.ini 67.83 KB │ │ sysctl.conf 2.03 KB │ └─vhosts (0 folders, 1 files, 826 bytes, 826 bytes in total.) │ localhost.conf 826 bytes └─src (0 folders, 6 files, 3.01 MB, 3.01 MB in total.) libmcrypt-2.5.8.tar.gz 1.27 MB mcrypt-2.6.8.tar.gz 460.85 KB memcache-3.0.8.tgz 68.87 KB mhash-0.9.9.9.tar.gz 909.61 KB mongo-1.6.10.tgz 204.19 KB redis-2.2.7.tgz 131.19 KB #web.sh #!/bin/bash ## alias ltmp_local=$(cd "$(dirname "$0")"; pwd) mkdir -p /app/{local,data} unalias cp ltmp_init=$ltmp_local/init/ ltmp_src=$ltmp_local/src/ ## system #history cp ${ltmp_init}bashrc /etc/ #time rm -rf /etc/localtime ln -s /usr/share/zoneinfo/Asia/Shanghai /etc/localtime #maildrop sed "s/MAILTO=root/MAILTO=""/g" /etc/crontab service crond restart #selinux setenforce 0 sed -i "s/SELINUX=enforcing/SELINUX=disabled/" /etc/selinux/config #limits echo ulimit -SHn 65535 >> /etc/profile source /etc/profile cp ${ltmp_init}limits.conf /etc/security/ #tcp cp ${ltmp_init}sysctl.conf /etc/ #yum yum -y install yum-fastestmirror yum remove httpd mysql mysql-server php php-cli php-common php-devel php-gd -y yum install -y wget gcc gcc-c++ openssl* curl curl-devel libxml2 libxml2-devel glibc glibc-devel glib2 glib2-devel gd gd2 gd-devel gd2-devel libaio autoconf libjpeg libjpeg-devel libpng libpng-devel freetype freetype-devel #download cd /app/local ##PCRE - Perl Compatible Regular Expressions #wget "ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/pcre-8.37.tar.gz" ##Tengine #wget "http://tengine.taobao.org/download/tengine-2.1.0.tar.gz" ##MySQL #wget "https://downloads.mariadb.com/archives/mysql-5.6/mysql-5.6.25-linux-glibc2.5-x86_64.tar.gz" ##PHP #wget "http://cn2.php.net/distributions/php-5.6.11.tar.gz" ##Mhash #wget "http://downloads.sourceforge.net/mhash/mhash-0.9.9.9.tar.gz" ##libmcrypt #wget "http://downloads.sourceforge.net/mcrypt/libmcrypt-2.5.8.tar.gz" ##Mcrypt #wget "http://downloads.sourceforge.net/mcrypt/mcrypt-2.6.8.tar.gz" ## soft cd $ltmp_local #pcre tar zxvf pcre-8.37.tar.gz 1> /dev/null cd pcre-8.37 ./configure make && make install cd ../ #tengine groupadd www useradd -g www www #安装Tengine cd $ltmp_local tar zxvf tengine-2.1.0.tar.gz 1> /dev/null cd tengine-2.1.0 ./configure --user=www --group=www --prefix=/app/local/nginx --with-http_stub_status_module --with-http_ssl_module --with-pcre=${ltmp_local}/pcre-8.37 make && make install cd ../ #nginx config cd $ltmp_local cp ${ltmp_init}nginx.conf /app/local/nginx/conf/ cp -r ${ltmp_init}vhosts /app/local/nginx/conf/ mkdir -p /app/data/localhost chmod +w /app/data/localhost echo "" > /app/data/localhost/phpinfo.php chown -R www:www /app/data/localhost echo "export PATH=$PATH:/app/local/nginx/sbin">>/etc/profile && source /etc/profile cp ${ltmp_init}nginx /etc/rc.d/init.d/ chmod +x /etc/init.d/nginx ulimit -SHn 65535 service nginx start #libmcrypt cd $ltmp_src tar -zxvf libmcrypt-2.5.8.tar.gz 1> /dev/null cd libmcrypt-2.5.8 ./configure make && make install cd ../ #mhash cd $ltmp_src tar -zxvf mhash-0.9.9.9.tar.gz 1> /dev/null cd mhash-0.9.9.9 ./configure make && make install cd ../ #mcrypt cd $ltmp_src tar -zxvf mcrypt-2.6.8.tar.gz 1> /dev/null cd mcrypt-2.6.8 LD_LIBRARY_PATH=/usr/local/lib ./configure make && make install cd ../ #php cd $ltmp_local tar zxvf php-5.5.27.tar.gz 1> /dev/null cd php-5.5.27 ./configure --prefix=/app/local/php --with-config-file-path=/app/local/php/etc --enable-fpm --enable-mbstring --with-mhash --with-mcrypt --with-curl --with-openssl --with-mysql=mysqlnd --with-mysqli=mysqlnd --with-pdo-mysql=mysqlnd make && make install #memcache cd $ltmp_src tar zxvf memcache-3.0.8.tgz 1> /dev/null cd memcache-3.0.8 /app/local/php/bin/phpize ./configure --enable-memcache --with-php-config=/app/local/php/bin/php-config --with-zlib-dir make && make install #mongo cd $ltmp_src tar zxvf mongo-1.6.10.tgz 1> /dev/null cd mongo-1.6.10 /app/local/php/bin/phpize ./configure --with-php-config=/app/local/php/bin/php-config make && make install #redis cd $ltmp_src #redis tar zxvf redis-2.2.7.tgz 1> /dev/null cd redis-2.2.7 /app/local/php/bin/phpize ./configure --with-php-config=/app/local/php/bin/php-config make && make install #php-fpm cp ${ltmp_init}php.ini /app/local/php/etc/ cp ${ltmp_init}php-fpm.conf /app/local/php/etc/ echo "export PATH=$PATH:/app/local/php/bin">>/etc/profile && source /etc/profile touch /app/local/php/var/log/php-fpm.slow.log cp ${ltmp_local}/php-5.5.27/sapi/fpm/init.d.php-fpm /etc/rc.d/init.d/php-fpm chmod +x /etc/rc.d/init.d/php-fpm service php-fpm start
文章版权归作者所有,未经允许请勿转载,若此文章存在违规行为,您可以联系管理员删除。
转载请注明本文地址:https://www.ucloud.cn/yun/21047.html
摘要:前言默认安装,通常只能连一台服务器,其配置信息是保存在的配置文件里的,当我们需要在多台服务器之间进行切换登陆的时候,修改起来非常麻烦。遵照下面的配置方法,我们可以方便的使用连接多台。 showImg(//i.v2ex.co/68353qlH.png); 前言 默认安装phpMyAdmin,通常只能连一台MySQL服务器,其配置信息是保存在phpMyAdmin的配置文件里的,当我们需要在...
摘要:前言和数据库相比的管理工具其实不算多,除了客户端以外想要通过类似一样通过管理的数据库应该也只剩下了。 前言 和MySQL数据库相比MongoDB的管理工具其实不算多,除了MongoVUE客户端以外想要通过类似phpMyAdmin一样通过Web管理MongoDB的数据库应该也只剩下RockMongo了。 和phpMyAdmin一样好用的MongoDB管理工具 更新记录 2015年10月...
摘要:我自己是从商业化环境走出来的,对于开源的部署方案也是在一点一点摸索,我相信其中也必然包含某些坑爹的配置。设置为表示当经常出现错误时可以尝试更改此选项。设置环境变量添加服务设置开机自动启动服务配置其它扩展都可以动态添加,没事的 showImg(//i.v2ex.co/Up79Hq7l.jpeg); 前言 现在很多朋友都了解或者已经在使用LNMP架构,一般可以理解为Linux Shel...
阅读 1768·2021-10-11 10:57
阅读 2352·2021-10-08 10:14
阅读 3393·2019-08-29 17:26
阅读 3340·2019-08-28 17:54
阅读 3020·2019-08-26 13:38
阅读 2885·2019-08-26 12:19
阅读 3608·2019-08-23 18:05
阅读 1277·2019-08-23 17:04